List of Messages |
CAUSE: You specified 0 for the DQS_DELAY_CHAIN_LENGTH parameter of the altdqs megafunction. When the DQS_DELAY_CHAIN_LENGTH parameter is set to 0, a DLL is not needed. The value of the DLL_DELAYCTRL_MODE parameter should be set to NONE. This warning usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager command.
ACTION: Change the value of the DQS_DELAY_CHAIN_LENGTH parameter to be greater than 0, or change the DLL_DELAYCTRL_MODE parameter value to REGISTER. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager command.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.