List of Messages |
CAUSE: You specified one or more options for optimizing netlists during fitting, and attempted to back-annotate the current design. However, the Quartus Prime software cannot perform these netlist optimizations on a back-annotated design.
ACTION: Click Yes to back-annotate the design, or click No to cancel the operation. If you want to use one of these netlist optimizations on a design and then back-annotate the design, Altera recommends that you generate a Verilog Quartus Mapping File (.vqm) that indicates the duplicated LUTs that the Quartus Prime software generated and/or resynthesized while fitting the design.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.