| List of Messages | |
CAUSE: You tried to run the SignalTap II Logic Analyzer, save the SignalTap II File (.stp), or use the Save To Data Log command (Edit menu). However, you did not assign a clock signal to a node. As a result, the Quartus Prime software generated a pin which you can assign to a clock.
ACTION: Click OK to close the message dialog box. Use the SignalTap II: pre-synthesis filter in the Node Finder to search for a valid clock signal, or assign the pin the Quartus Prime software generated to a clock.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.