List of Messages |
CAUSE: You selected a programming hardware setup for a Chain Description File (.cdf), and clicked Auto Detect in the Programmer window. However, the Quartus Prime software cannot scan the device chain because the hardware you selected is either not connected to the port you specified, the port you specified is already in use, or the JTAG chain could not be scanned.
ACTION: Make sure that the hardware you selected is connected to the port you specified and that no other programs are using the port. If the JTAG chain could not be scanned, make sure that the board is powered on.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.