List of Messages |
CAUSE: The Quartus Prime software attempted to add a user-defined device to the JTAG server, but the operation failed. As a result, the Quartus Prime software returned the specified internal error code.
ACTION: If you are using a PC, make sure the JTAG server is running by typing jtagconfig --serverinfo at the command prompt. If it the JTAG server is not running, ask your system administrator, or a user who is a member of the Administrators group, to run the Quartus Prime software on your PC or reinstall the Quartus Prime software, and then try to add the user-defined device again. Contact Altera Applications for further assistance. If you are using a Linux workstation, use the kill command on any copies of the jtagd process, and then try to add the user-defined device again. If you receive this error again, restart your computer.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.