List of Messages |
CAUSE: You assigned logic conditions to one or more trigger levels and/or enabled a trigger input signal, and then ran the SignalTap II Logic Analyzer. As a result, the SignalTap II Logic Analyzer is waiting for the trigger to occur.
ACTION: No action is required. If you need to stop the SignalTap II Logic Analyzer without waiting for the trigger, stop the SignalTap II Logic Analyzer.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.