List of Messages |
CAUSE: You connected registers to a preset signal but not a clear signal. As a result, the registers will power-up high.
ACTION: No action is required. However, if you want the registers to power-up low, turn off the NOT Gate Push-Back logic option on the registers.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.