List of Messages |
CAUSE: You ran the SignalTap II Logic Analyzer. As a result, the data acquisition state changes according to the following sequence: IDLE, FILL, PRE, POST, DONE. In the IDLE state, the SignalTap II Logic Analyzer is ready for data acquisition; in the FILL state, the SignalTap Logic Analyzer fills the acquired data into the memory buffer; in the PRE state, the SignalTap II Logic Analyzer fills the memory buffer in a circular fashion and waits for the event or trigger to occur; in the POST state, all triggers have occurred and the accompanying text indicates the level of the event; in the DONE state, all samples are collected.
ACTION: No action is required.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.