List of Messages |
CAUSE: You set the FYGR_TORNADO_USE_OLD_DQS_DELAY variable to ON in the quartus.ini file so that the Quartus Prime software uses the DQS Delay setting from Quartus Prime software version 3.0 for the specified DQS I/O pin.
ACTION: No action is required. If you require a different setting, remove the FYGR_TORNADO_USE_OLD_DQS_DELAY variable or set the value to OFF in the quartus.ini file.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.