List of Messages |
CAUSE: You made location or region assignments for the DQS I/O and DQ I/O pins that are driven by it to a DQS I/O pin in the device that does not have enough corresponding DQ I/O pins to place all the DQ I/O pins driven by the DQS I/O pin. This error may also occur if part or all of the corresponding DQ I/O pins of the DQS I/O pin in the device is already driven by another DQS I/O pin in the design.
ACTION: Change the location or region assignment for the DQS I/O pin and its corresponding DQ I/O pins.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.