| List of Messages | |
CAUSE: You assigned the specified output, input, or bidirectional pin in the I/O bank that consumes that specified amount of static current which exceeds the maximum current allowed. Refer to the message that appears above this message in the Messages window or the Messages section of the Report window for information on the I/O bank that contains the specified pin.
ACTION: Reassign some of the output and/or bidirectional pins to reduce the current density, or assign some pins to use an I/O standard with a lower current. To display I/O banks, open the Chip Planner and turn on I/O bank display IN the Layers Settings dialog box.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.