List of Messages |
CAUSE: Output enable signal associated with io_12_lane input-only pins must be connected to GND, or to VCC if lane_db_pin_<>_oe_invert parameter is set.
ACTION: Connect the output enable port (oe_from_core) associated with input-only pins on the io_12_lane atom to GND (or to VCC if lane_db_pin_<>_oe_invert parameter is set).
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.