List of Messages |
CAUSE: CLKUSR pin has been reserved for calibration and must be assigned a clock of 100-125 MHz. This is a preemtive warning.
ACTION: Assign the CLKUSR pin to a 100-125 MHz clock. If the pin has already been assigned the correct clock frequency, use the QSF assignment 'set_global_assignment -name MESSAGE_DISABLE <message_id>' to suppress this critical warning.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.