List of Messages |
CAUSE: You specified a combination of ports and parameters that is not natively supported in hardware. The megafunction will do a byte-enable emulation (tie it with write enable to achieve the required support)
ACTION: Modify the design to disable the use of the byteena_a port, change the device family, or change the port widths. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.