List of Messages |
CAUSE: The current JTAG configuration is invalid. This message can occur because the board is not powered on, the programming hardware is not connected, there is a problem with the circuit board, you did not select a communications cable or a device, or you did not download a design with the current SRAM Object File (.sof).
ACTION: Make sure the circuit board is powered on, the programming hardware is connected properly, select a communications cable and device, and download the current SOF.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.