List of Messages |
CAUSE: You specified a set of registers in a Verilog Design File (.v) or VHDL Design File (.vhd) that act as true dual port RAM. However, Analysis & Synthesis cannot implement the registers as RAM hardware because more than two unique addresses are used.
ACTION: If you do not want Analysis & Synthesis to implement the register logic with RAM hardware, no action is required. If you want Analysis & Synthesis to implement the register logic with RAM hardware, ensure that the RAM uses at most two unique addresses.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.