| List of Messages | |
CAUSE: This design has nodes that do not fanout to OUTPUT or BIDIR pins. They do not contribute to the output logic of this design and therefore will be removed.
ACTION: No action is required. If you want to avoid this message in the future, you can remove the unused logic from the design.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.