List of Messages |
CAUSE: In a Verilog Design File (.v), you specified a message_on or message_off directive, and followed that with an integer intended to be a message ID. However, since the integer is not a valid message ID, it is very likely there was a typo when specifying the message ID.
ACTION: Check the text of the message you want to turn on or turn off; the message ID is in the message text.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.