| List of Messages | |
CAUSE: You changed the target device family for a design, and compiled the design. The design instantiated the specified PLL for the old target device family. While remapping the PLL from the old target device family to the new target device family, the Quartus Prime software cannot remap the specified port of the PLL to the new target device family.
ACTION: Change the PLL for the old target device family so it does not contain the port that the Quartus Prime software cannot remap to the new target device family.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.