List of Messages |
CAUSE: You changed the target device family for a design, and compiled the design. The design uses the PLL reconfiguration feature by instantiating an enhanced PLL for the old target device family. The Quartus Prime software attempted to remap the PLL reconfiguration feature from the old target device family to the new target device family, but cannot perform the remapping because the PLL reconfiguration feature is different for the two device families.
ACTION: Change the design so it uses the correct PLL reconfiguration feature for the new target device family. Refer to the Phase-Locked Loop Reconfiguration Megafunction User Guide on the Literature section of the Altera website for information about the correct PLL reconfiguration feature for the new target device family.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.