List of Messages |
CAUSE: A node is connected to one or more destinations but does not have a source. This error can also occur if you have not correctly named a node that is connected to a bus in a Graphic Design File (.gdf) or Block Design File (.bdf). This error can also occur if you added a node into the SignalTap II File used for compilation and this node does not have a source.
ACTION: Connect the node to the output of a logic function. If you want to use the default unconnected input to a macrofunction, make sure that nothing is connected to the input of the macrofunction. If enabling the SignalTap II Logic Analyzer is the cause, then remove the node from the STP File.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.