List of Messages |
CAUSE: The specified DQS I/O pin is referenced by a different system clock than the system clock that is connected by the altdqs megafunction. The DQS I/O pin can be referenced only by one system clock.
ACTION: Delete the DQS Input Reference Clock logic option on the DQS I/O pin. In general, the DQS Phase Shift , DQS Frequency , and DQS Input Reference Clock logic options are ignored if you use the altdqs megafunction.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.