List of Messages |
CAUSE: You tried to add a JEDEC STAPL Format File (.jam) or Jam STAPL Byte Code 2.0 File (.jbc) to a JTAG chain in the Programmer window. However, the Quartus Prime software cannot add the file to the JTAG chain because the Jam File or JBC File does not contain a cyclic redundancy check (CRC) code. The Jam File or JBC File must contain a CRC code.
ACTION: Recreate the Jam File or JBC File or open the Jam File or JBC File in the Quartus Prime Text Editor and add the CRC code at the end of the file.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.