List of Messages |
CAUSE: You directed the Programmer to configure the specified device. However, the Programmer cannot successfully configure the device because the JTAG ID code for the specified target device does not match any of the valid ID codes for the device. This problem occurs when the location of the target device on the circuit board does not match the device's location in the device chain in the Chain Description File (.cdf).
ACTION: Make sure the location of the target device on the circuit board matches the device's location in the device chain in the Chain Description File (.cdf).
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.