List of Messages |
CAUSE: The specified default toggle rate was found either on the command line or in the Quartus Prime Setting File (.qsf), but the specified unit is invalid.
ACTION: Specify a valid unit for the default toggle rate. If the default toggle rate is specified as a percentage, the unit is the % symbol (for example, 12.5%). If the default toggle rate is specified as an absolute value, then the unit is transitions/s (for example, "2000 transitions/s").
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.