List of Messages |
CAUSE: The specified default toggle rate was found either on the command line or in the Quartus Prime Setting File (.qsf) as a percentage, but the specified value is invalid.
ACTION: Specify a valid value for the default toggle rate. The value must be greater than or equal to 0.0.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.