List of Messages |
CAUSE: The specified default toggle rate was found either on the command line or in the Quartus Prime Setting File (.qsf), but it is invalid.
ACTION: Specify a valid default toggle rate. If the default toggle rate is specified as a percentage, the value must be greater than or equal to 0.0 followed by the % symbol (for example, 12.5%). If the default toggle rate is specified as an absolute value, the value must be positive followed by transitions/s (for example "2000 transitions/s").
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.