List of Messages |
CAUSE: Fitter cannot find a common voltage setting for the channel(s) using xN routing, possibly due to the voltage settings for the specified power supply and/or the placement of the channel(s).
ACTION: Either change the voltage setting for the given power supply on the affected channel(s), assign the affected channel(s) to different pins, or place the source(s) driving the xN routing at different locations.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.