List of Messages |
CAUSE: The specified input port in your design is driven by the specified signal when it should be driven by a primary design input pin.
ACTION: Change your design so that the specified port is driven directly by a primary design input pin. You must assign the port to one of the nPERST[L,R][0:1] pins only. See the Arria 10 Device Family Pin Connection Guidelines for more information.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.