List of Messages |
CAUSE: You specified the mapping connection from the specified signal on a conduit to the I/O on the specified block. However, the I/O and the signal you are mapping to the I/O do not agree. The number of bits of the input must be equal to that of the output.
ACTION: Specify the mapper properties so the input is equal to the output.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.