List of Messages |
CAUSE: In a Graphic Design File (.gdf), nodes connect the blocks and pins. Signals between the blocks and pins are not mapped automatically if they are connected through nodes, but the signals will be mapped automatically if they are connected through conduits.
ACTION: Change the line style to conduit to automatically map signals between the blocks and pins.
CAUSE: In a mapper that does not contain the connection from the node signals to the input and output signals of the block. The Quartus Prime software cannot compile the design if the node signals are not mapped to the I/O signals of the block.
ACTION: Map the node signals to the I/O signals of the block.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.