List of Messages |
CAUSE: In a Graphic Design File (.gdf), you connected a bus line to a conduit line. However, one signal in the bus line is not in the conduit network. To automatically connect all the bus signals to the conduit network, all signals in the bus must have a corresponding signal in the conduit network.
ACTION: Modify the bus name or edit the signals in the conduit network.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.