List of Messages |
CAUSE: You selected a target device for the current project. The Fitter cannot place the specified enhanced PLL in the specified PLL location because the location does not accept enhanced PLLs that use the fbin port, use more than one extclk port, or have the SCAN_CHAIN parameter set to LONG. This message is a submessage of the message that precedes it in the Messages window and in the Messages section of the Report window.
ACTION: Modify the design to reduce the number of PLLs in the project, reassign the PLL to another location, or set the SCAN_CHAIN parameter to SHORT.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.