List of Messages |
CAUSE: You either used the altdqs megafunction or assigned either a DQS Phase Shift or DQS Frequency logic option setting to a DQS I/O pin that is different from the settings in the specified PLL that drives it. All DQS I/O pins driven by the same PLL must have the same DQS Phase Shift or DQS Frequency logic option settings as the PLL.
ACTION: Change the frequency or phase shift setting of the PLL or its corresponding DQS pins.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.