List of Messages
Parent topic: List of Messages

ID:186234 Can't place <name> PLL "<name>" because I/O pin "<name>" (port type <name> of the PLL) is assigned to a location which is not connected to port type <name> of any PLL on the device

CAUSE: You assigned a pin to a location that is not connected to the specified port type of the specified fast PLL or enhanced PLL. The Fitter cannot place the PLL.

ACTION: Change the location assignment for the I/O pin or delete the assignment.

Parent topic: List of Messages

Contact Altera | Legal Notice

Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.