List of Messages |
CAUSE: The Fitter cannot place the specified node because it is a differential I/O node. You might have changed the netlist by specifying a non-differential I/O standard for the differential node.
ACTION: Either remove the non-differential I/O standard from the specified node or run the Fitter to update the netlist.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.