List of Messages |
CAUSE: You have too many JTAG blocks in the design. There are not enough JTAG block locations on the device.
ACTION: Modify the design so that the number of JTAG blocks used is less than or equal to the number of JTAG block locations available on the device.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.