List of Messages |
CAUSE: You specified the Phase-Locked Loop (PLL) to the specified operation mode. However, the Fitter cannot place the PLL because the target PLL supports only no compensation mode.
ACTION: Change the PLL location to operate on compensation mode or assign the specified PLL to a different location.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.