List of Messages |
CAUSE: You used a bidirectional pin with pseudo-differential I/O standard. However, on the input path, the pins are not connected to the differential buffer.
ACTION: If you want to use such a configuration, make sure that the OE for output buffers is set to VCC. Additionally, you need to use the assignment TREAT_BIDIR_AS_OUTPUT (if no fan-out exists on the input path) or XSTL_INPUT_ALLOW_SE_BUFFER (if input path has fan-outs) on at least one of the complementary differential pins.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.