List of Messages |
CAUSE: The Fitter tried to place the specified Flexible LVDS or differential I/O in the specified row and side. However, the Flexible LVDS or differential I/O placement does not meet the specified minimum spacing requirement away from the existing I/O in the specified row. The minimum spacing requirement is necessary to limit noise along the power line. As a result, the Fitter cannot place the Flexible LVDS or differential I/O.
ACTION: Modify the design so that the spacing between the Flexible LVDS or differential I/O and the existing I/O meets the specified minimum spacing requirement.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.