List of Messages |
CAUSE: I/Os that use 1.2V or 1.5V VCCIO and an impedance value of 25 ohms cannot not be driven by on-chip termination (OCT) control blocks that are on the left or right side of the chip.
ACTION: Assign the control block to the top or bottom edges of the chip by making a location assignment to the corresponding rup or rdn pin.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.