ID:169247 Total number of single-ended output or bi-directional pins in Bank <name> have exceeded the recommended amount in a bank where dedicated LVDS, RSDS, or mini-LVDS outputs exists. Refer to the pad placement and DC guidelines section in the <name> Device I/O Features chapter of the <name> Device Handbook for details on this condition.

CAUSE: There are too many output or bi-directional I/O pins with single-ended I/O standards sharing the specified bank with output I/O pin(s) using dedicated LVDS, RSDS, or min-LVDS I/O standard. Such a condition may result in excessive output jitter on the differential output(s) in a situation where all the single-ended outputs are switching simultaneously. Refer to the pad placement and DC guidelines section in the specified device I/O features chapter of the specified device handbook for details on this condition.

ACTION: Delete or change the location assignment, or change the I/O standard assignment.