List of Messages |
CAUSE: The length of the device chain in Fault Injection Debugger does not match the length of the physical device chain. Either the board is not powered on or the programming hardware is not connected.
ACTION: Ensure that the board is powered on and the programming hardware is connected properly. Then perform auto-detect on the chain.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.