List of Messages |
CAUSE: The I/O standard on the DQS/DQ/DM pin is not supported for current device. If you have not made an I/O standard assignment, then the default I/O standard for the project is not supported.
ACTION: Modify the project by adding supported I/O standards to the DQS/DQ/DM pin. The illegal pins and a supported list of I/O standards appear in a sub-message.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.