List of Messages |
CAUSE: The I/O standard and/or the current strength on the DQS pin used with the double data rate (DDR) controller is not supported. If you have not made any I/O assignments to the pin, then the default I/O assignments for the project are not supported.
ACTION: Modify the project by adding a supported I/O standard and current strength on all pins used with the DDR controller. The supported list of I/O standards appears in a sub-message.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.