List of Messages |
CAUSE: The specified PLL uses automatic switchover features, such as the clkbad[], activeclk, or clkloss ports, or the switchover on loss-of-clock feature was selected, but the SWITCH_OVER_TYPE parameter is set to MANUAL. When the SWITCH_OVER_TYPE parameter is set to MANUAL, the PLL cannot use automatic switchover features.
ACTION: Change the SWITCH_OVER_TYPE parameter of the specified PLL to AUTO, or do not use automatic switchover features with the SWITCH_OVER_TYPE parameter set to MANUAL.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.