List of Messages |
CAUSE: You set the OPERATION_MODE parameter of the specified PLL to ZERO_DELAY_BUFFER, but the clock output specified as the COMPENSATE_CLOCK does not feed an output pin. In this mode, the compensated clock must feed an output pin.
ACTION: Connect the compensated clock to an output pin, or choose a different clock to compensate that does feed an output pin.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.