List of Messages |
CAUSE: You specified the input frequency and the multiplication factor for a PLL. However, the input frequency is outside the specified frequency range required by the specified multiplication factor. The input frequency must be in the required frequency range. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Modify the design so that the input frequency range of the PLL is in the required frequency range, or modify the required frequency range by changing the multiplication factor of the PLL.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.