List of Messages |
CAUSE: You specified the enable0 output port of the specified fast PLL. However, enable0 output port must feed only the enable0 input port of a SERDES receiver. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Modify the design so that the enable0 output port of the fast PLL feeds only an enable0 input port of a SERDES receiver.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.