List of Messages |
CAUSE: The specified PLL must contain the specified internal parameter when the clk, extclk, enable0, or enable1 port has a fan-out. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Specify an internal parameter value of clk_counter, extclk_counter, enable0_counter, or enable1_counter for the PLL.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.